Coconut opener closures · Factory direct, wholesaleNút khui dừa · Xưởng sản xuất trực tiếp, giá sỉ

Coconut opener closures. Straw in, no knife.Nút khui dừa. Cắm ống hút là uống.

We manufacture Sagonut plastic opener closures for young coconuts and sell them wholesale to coconut packers and exporters. Fit one on each trimmed coconut, hang the straw on it, and the buyer drinks with no tools.Chúng tôi sản xuất và bán sỉ nút khui dừa Sagonut cho vựa dừa và doanh nghiệp xuất khẩu dừa tươi. Gắn nút lên trái dừa gọt, treo ống hút lên nút, người mua cắm ống hút là uống, không cần dụng cụ.

PP + ABS SGS · EU 2025/40 PFAS PASS SGS · Pb Cd Hg Cr(VI) PASS Made in Vietnam
Sagonut coconut opener closures, with one fitted on a trimmed young coconut
Two modelsHai mẫuModel 1 long lock · Model 2 short lockMẫu 1 khóa dài · Mẫu 2 khóa ngắn
How it worksCách hoạt động

From packing line to first sip in three movesTừ xưởng đóng gói đến ngụm đầu tiên chỉ ba bước

  1. Fit at packingGắn khi đóng góiPackerXưởng

    Press the closure onto the trimmed top of the coconut and hang the straw: on the lock tip (Model 1) or on the cap (Model 2). Then wrap or label as usual.Ấn nút lên đầu trái dừa đã gọt rồi treo ống hút: lên đầu khóa (mẫu 1) hoặc lên nút (mẫu 2). Sau đó bọc màng hoặc dán nhãn như bình thường.

  2. Take the strawLấy ống hútConsumerNgười dùng

    The straw travels with the coconut, so it is never lost in the carton. The buyer takes it with one hand.Ống hút đi cùng trái dừa nên không thất lạc trong thùng. Người mua lấy ra bằng một tay.

  3. Push through and drinkCắm và uốngConsumerNgười dùng

    Push the straw through the centre of the cap and drink. No knife, no drill, no opener.Cắm ống hút qua tâm nút và thưởng thức. Không cần dao, khoan hay dụng cụ khui.

Why packers choose itVì sao nên dùng

Why coconut packers fit SagonutVì sao vựa dừa chọn nút Sagonut

No tools at the shelfKhông cần dụng cụ

Retail and café buyers stop asking how to open it. That removes the main barrier to selling whole coconuts abroad.Người mua ở siêu thị, quán cà phê không còn lo cách mở. Đây là rào cản lớn nhất khi bán dừa nguyên trái ra nước ngoài.

Fits your current lineHợp dây chuyền hiện có

Fitted by hand at the trimming station, before shrink wrap or labelling. No new machine needed.Gắn bằng tay ngay tại khâu gọt, trước khi bọc màng hay dán nhãn. Không cần đầu tư máy mới.

Tested for EU packaging rulesĐã kiểm nghiệm theo quy định EU

SGS Vietnam tested the parts against Regulation (EU) 2025/40: no PFAS (total fluorine) and no restricted heavy metals detected.SGS Việt Nam đã kiểm nghiệm theo Quy định (EU) 2025/40: không phát hiện PFAS (tổng flo) và kim loại nặng bị hạn chế.

Test reportsBáo cáo kiểm nghiệm

Independently tested by SGS VietnamKiểm nghiệm độc lập bởi SGS Việt Nam

Sample: plastic closure, white PP and red ABS parts. Full reports are available to buyers on request.Mẫu thử: nắp nhựa, chi tiết PP trắng và ABS đỏ. Báo cáo đầy đủ gửi cho khách hàng khi có yêu cầu.

PFAS: total fluorinePFAS: tổng flo

PASS
RegulationQuy định
(EU) 2025/40
MethodPhương pháp
EN 14582:2016, ion chromatography
ResultKết quả
ND (not detected), limit 50 mg/kg
Report no.Số báo cáo
VNHL2608022915HG
IssuedNgày cấp
07 Sep 2026

Heavy metals in packagingKim loại nặng trong bao bì

PASS
RegulationQuy định
(EU) 2025/40
MethodPhương pháp
CEN CR 13695-1:2000
ResultKết quả
Pb, Cd, Hg, Cr(VI) all ND; total limit ≤100 mg/kg
Report no.Số báo cáo
VNHL2609024778HG
IssuedNgày cấp
24 Sep 2026

Results refer to the submitted samples only, as stated by SGS.Kết quả chỉ áp dụng cho mẫu đã gửi thử, theo ghi chú của SGS.

ProductsSản phẩm

Two models, one easy openingHai mẫu nút, cùng cách mở dễ dàng

Model 1 long-lock closure holding a straw upright
Model 1 closures with long red locksModel 1 fitted on a trimmed coconut
Model 1Mẫu 1

Long lock, straw hangs on the lockKhóa dài, ống hút treo trên khóa

  • Straw stands uprightỐng hút treo đứngA clip at the tip of the long red lock holds the straw upright beside the coconut.Đầu khóa đỏ dài có kẹp giữ ống hút đứng thẳng cạnh trái dừa.
  • Easy to see, easy to grabDễ thấy, dễ lấyNo digging in the carton or peeling tape to find a straw.Không phải tìm ống hút trong thùng hay bóc băng keo.
  • Clean cap surfaceMặt nút luôn thoángThe straw does not rest on the cap, so the centre stays clean.Ống hút không đè lên mặt nút nên tâm nút luôn sạch.
Model 2 short-lock closure on a coconut with a wrapped straw across the cap
Model 2 closures with short red locks and a wrapped strawClose-up of Model 2 short red locks
Model 2Mẫu 2

Short lock, straw hangs on the capKhóa ngắn, ống hút treo trên nút

  • Compact lockKhóa ngắn, gọnThe short red lock sticks out less, so cartons pack tighter and wrap goes on easily.Thanh khóa đỏ ngắn, ít nhô ra nên xếp thùng gọn, bọc màng dễ.
  • Straw rests on the capỐng hút treo trên nútThe wrapped straw sits on the cap, fitted in the same step as the closure.Ống hút bọc riêng nằm ngay trên nút, gắn cùng lúc với nút.
  • Tidy on the shelfGọn gàng trên kệEvery coconut looks the same: white cap, red lock, straw on top.Trái dừa nào cũng đồng đều: nút trắng, khóa đỏ, ống hút trên nút.
SpecificationsThông số kỹ thuật

What's in the boxSản phẩm gồm

ModelsMẫuModel 1 long lock · Model 2 short lockMẫu 1 khóa dài · Mẫu 2 khóa ngắn
MaterialsVật liệuPP (white) · ABS (red)
StrawỐng hútNot included. Packers use their own wrapped strawKhông kèm theo. Vựa dừa tự chuẩn bị ống hút bọc riêng
Base diameterĐường kính đếOn requestTheo yêu cầu
Unit weightKhối lượngOn requestTheo yêu cầu
MOQOn requestTheo yêu cầu
PackingĐóng góiOn requestTheo yêu cầu
OriginXuất xứHo Chi Minh City, Vietnam
Sagonut closures
OEM & customOEM & theo yêu cầu

We make the mould, so we can make it yoursTự làm khuôn nên làm theo ý bạn được

Sagonut is designed, tooled and moulded in-house by Nhan Loc Phat Mold Co., Ltd., a mould maker and injection moulder in Ho Chi Minh City.Sagonut do Công ty TNHH Khuôn mẫu Nhân Lộc Phát tự thiết kế, làm khuôn và ép nhựa tại TP.HCM.

  • Your coloursMàu theo thương hiệu
    Match the cap and tab to your brand.Phối màu nắp và chốt theo nhận diện của bạn.
  • Your logo on the capLogo trên nắp
    Embossed in the mould or printed.Dập nổi trong khuôn hoặc in.
  • Sized to your coconutTheo cỡ trái dừa
    Base and spike adapted to your trim profile.Đế và mũi đục điều chỉnh theo kiểu gọt của bạn.
  • Your design stays confidentialBảo mật thiết kế
    NDA signed before any custom work starts.Ký NDA trước khi bắt đầu làm theo yêu cầu.
FAQ

Questions buyers askCâu hỏi thường gặp

Which coconuts does it fit?Dùng được cho loại dừa nào?

Trimmed young (green) coconuts with a flat-cut top. Send us a few of your coconuts and we will test fit before you order.Dừa xiêm non đã gọt, đầu cắt phẳng. Bạn gửi vài trái dừa, chúng tôi thử lắp trước khi đặt hàng.

Can I get samples?Có nhận mẫu thử không?

Yes. Use the form below and tell us your destination country and monthly volume.Có. Điền form bên dưới, ghi rõ nước xuất khẩu và sản lượng mỗi tháng.

Can I see the full SGS reports?Xem được báo cáo SGS đầy đủ không?

Yes. We send the full PDF reports to buyers on request.Được. Chúng tôi gửi bản PDF đầy đủ khi khách hàng yêu cầu.

Do you supply the straws?Có cung cấp ống hút không?

Straws are not included. Most packers use individually wrapped straws. Send us your straw and we confirm it fits the holder.Nút không kèm ống hút. Đa số vựa dừa dùng ống hút bọc riêng. Gửi chúng tôi ống hút bạn dùng để kiểm tra có vừa chỗ treo không.

ContactLiên hệ

Get samples and a quoteNhận mẫu và báo giá

We reply within one working day (Vietnam time, UTC+7).Phản hồi trong 1 ngày làm việc (giờ Việt Nam, UTC+7).

Emailbao@sagonut.com
PhoneĐiện thoại+84 911 114 512
FactoryNhà máyNhan Loc Phat Mold Co., Ltd. · Binh Tan, Ho Chi Minh City, Vietnam

Sending opens your email app with these details. You can also write to bao@sagonut.com.Bấm gửi sẽ mở ứng dụng email với nội dung đã điền sẵn. Hoặc gửi thư tới bao@sagonut.com.